IG.100104

Power Cable ‣ Ronin 2 to 2-Pin Lemo for Power Breakout

Length


This 6-Pin Lemo Straight to 2-Pin Lemo Straight cable allows you to feed power from the Ronin 2 to your accessories.

There's a few use case scenarios.

You can send power to our Power Breakout solution - providing three additional on camera 2-Pin Lemo outputs.

Alternatively, you could power ring mounted accessories such as a SmallHD 503, 703, Cine 7 or Teradek Transmitter that have a 2-Pin Lemo input.

The Ronin 2 gimbal delivers regulated 14.4V from two onboard Accessory Power Ports. One on the underside of the cage and the other at the top of the Pan Motor.

 


LENGTH: 8-INCH / 20CM

 


LENGTH: 12-INCH / 30CM

  • This is the ideal length for most camera builds using our Power Breakout. Our advice is to mount the Power Breakout at the back of the Camera Top Plate for ergonomic cable routing and gimbal weight distribution.

 


CUSTOM LENGTHS

As mentioned above, this cable can be used to power your existing accessories. Let us know if you require a custom length by adding a note during the checkout process.

If you need any advice on the best combination to suit your particular camera build, feel free to direct message Tom Waugh via the Ignite Digi Instagram, or drop him an email tom@ignitedigi.com.au

The Ignite Digi range of fit for purpose cables are made with premium silicone wire and protected with Techflex braid. They're flexible and resistant to abrasion, designed to endure the most challenging conditions on set 🎥 🔥

Assembled and tested in Tasmania, Australia.



CONNECTOR SPECS
1B 6-Pin (male) Lemo Straight compatible connector
0B 2-Pin (male) Lemo Straight compatible connector

LENGTH
8-inch / 20cm
12-inch / 30cm

WEIGHT
8-inch ‣ 1.05oz / 30g
12-inch ‣ 1.26oz / 35g



 

RELATED ACCESSORIES

You may also like our other Ronin 2 power cables: