Power Cable ‣ MōVi Pro D-Tap to RED DSMC2

Connector Type

This D-Tap to 6-Pin Lemo cable allows you to power your RED DSMC2 with regulated 14V from the MōVI Pro 12-14V CAM port located at the rear of the Tilt Stage Unit (TSU).

We offer two types of RED Lemo connector:


For RED DSMC2 V-Lock I/O Expander, DSMC2 Base Expander and DSMC2 Gold Mount Battery Module. Right Angle connector not compatible with DSMC2 Jetpack-SDI Expander.


For RED DSMC2 Jetpack-SDI Expander

At the D-Tap end, the wires exit the connector in the correct direction to ensure the cable doesn’t interfere with the other MōVI Pro 12V AUX D-Tap output.

We believe the ideal cable length is 12 inches (30cm) in order to avoid coiling or any unwanted snags around the gimbal cage.

The Ignite Digi range of premium cables made with silicone wire and protected with Techflex braid, are flexible and resistant to abrasion, and designed to endure the most challenging conditions on set.

Assembled in house by our team in Tasmania, Australia.

 ‣ 2-Pin (male) D-Tap/P-Tap connector
 ‣ 0B 6-Pin (female) Lemo Straight + Right Angle compatible connector

12” / 30cm

0.84oz / 24g