Designed for RED V-RAPTOR S35 & VV 🔥
These RF Supports eliminate wiggle and stress of the RF mount when using lens adapters!
There are many RF lens adapters on the market, some with Speedboosters, some without. Please take a moment to open the tabs below to make sure your lens adapter is compatible with our support!
KEY FEATURES
CNC machined from high-grade aluminium
Low profile design means no clashing with gimbal and tripod quick release plates
Can be used with or without our KEYSTONE
Each support ships with required screws + spares
KIPPERTIE ADAPTA
KipperTie Adapta RF to PL KipperTie Adapta RF to EF Also compatible with KipperTie Revolva SHIPS WITH Eight ¼”-20 x ½" socket head cap screws Eight M3 x 10mm socket head cap screws WEIGHT 0.77oz / 22g including screws DIMENSIONS 2.3 x 0.4 x 0.9” / 60 x 12 x 23mm
KIPPERTIE REVOLVA
COMPATIBLE LENS ADAPTERS KipperTie Revolva RF to PL KipperTie Revolva RF to EF Also compatible with KipperTie Adapta SHIPS WITH Four ¼”-20 x ½" socket head cap screws WEIGHT 1.55oz / 44g DIMENSIONS 2.3 x 0.4 x 0.9” / 60 x 12 x 23mm
METABONES RF TO PL
Metabones RF to PL NOT COMPATIBLE WITH Metabones RF to EF SHIPS WITH Four ¼”-20 x ½" socket head cap screws WEIGHT 0.95oz / 27g including screws DIMENSIONS 2.3 x 0.9 x 0.7” / 60 x 24 x 20mm
WOODEN CAMERA RF TO PL
Wooden Camera RF to PL NOT COMPATIBLE WITH Wooden Camera RF to LPLSHIPS WITH Four ¼”-20 x ½" socket head cap screws Two WEIGHT 0.8oz / 23g DIMENSIONS 2.3 x 0.8 x 0.6” / 60 x 21 x 16mm
WOODEN CAMERA RF TO LPL
Wooden Camera RF to LPL NOT COMPATIBLE WITH Wooden Camera RF to PLSHIPS WITH Six ¼”-20 x ½" socket head cap screws WEIGHT 0.95oz / 27g DIMENSIONS 2.3 x 0.7 x 0.4” / 60 x 18 x 10mm
HOT ROD CAMERAS RF TO PL
Hot Rod Cameras RF to PL (Mark II) SHIPS WITH Four ¼”-20 x ½" socket head cap screws WEIGHT 0.84oz / 24g including screws DIMENSIONS 2.3 x 0.7 x 0.8” / 60 x 20 x 21mm
INSTALLATION
A few simple steps to ensure a rigid mount:
First, mount your lens adapter to V-RAPTOR
Close the Locking Ring Lever
Place our support and install the screws loosely
Tighten the ¼”-20 screws into the camera
Then tighten the lens adapter screwsThere's no need to over-tighten these!
.
