IG.100247

Carbon Back Plate for RED V-RAPTOR

$148.00 AUD

Mount your Teradek transmitter to the RED V-RAPTOR™ micro V-Lock!

This ultra slimline carbon fibre plate, paired with our specific cables will guarantee a super clean build.

Rigging this way provides balancing space on gimbal. Moreover, enjoy full access to the V-RAPTOR side LCD and buttons.

For those looking for a side mounted Teradek solution, check out our Carbon Side Plate for KEYSTONE / RED V-RAPTOR.

KEY FEATURES

Compatible with new & older gen Teradeks
Robust aluminium V-Lock wedge
Lightweight carbon fibre plate
Keeps cable lengths short & tucked away
Teradek becomes useful counterbalance weight
Optimal antenna positions
All contained within the KEYSTONE footprint

Fully utilise the mounting realestate on V-RAPTOR with our Carbon Back Plate!

This solution keeps the side screen and buttons fully accessible but also provides space for your preferred MDR.

But what about camera power?

In gimbal mode, power your V-RAPTOR and accessories from MōVI Pro, MōVI XL or Ronin 2. Cable recommendations below ↓

Moving to handheld and studio mode, we recommend a hot-swappable rod mounted battery solution such as:

Pair these battery solutions with our Quick Release Bridge Plate for 15mm rod setups.

For 19mm studio builds, we recommend running an ARRI BP-8 or Bright Tangerine Left Field Bridge Plate, paired with our Spacer Plate and Ronin 2 Universal Tripod Adapter R2-017.

Both of these 15mm and 19mm setups will allow you to transfer the camera package from gimbal to handheld and studio mode, in less than a minute! We call this Quick Mode Change.

First step, mount your transmitter to Carbon Back Plate
Use two ¼”-20 x ½" countersunk screws to mount Teradek Bolt 4K LT 750, 1500 & MAX
Use four M2 x 6mm socket head cap screws to mount Teradek Bolt 500, 1000 & 3000 XT / LT
Slide the Carbon Back Plate into the Micro V-Lock until you hear a click
Lastly, connect our 9-inch 12G-SDI and power cable. Power cable recommendations below ↓

For the cleanest camera build possible, we suggest fit for purpose cables. The cables below are designed to source power from our Power Breakout module.

Teradek Bolt 4K LT 750, 1500 & MAX
We recommend the 8-inch length:
2-Pin Lemo Straight to 2-Pin Lemo Straight

Teradek Bolt 500, 1000 & 3000 XT / LT
We recommend the 8-inch length:
2-Pin Lemo Straight to 2-Pin Lemo Straight

COMPATIBLE WITH
Gen 4: Teradek Bolt 500 XT / LT
Gen 4: Teradek Bolt 1000 XT / LT
Gen 4: Teradek Bolt 3000 XT

Gen 5: Teradek Bolt 4K LT 750
Gen 5: Teradek Bolt 4K LT 1500
Gen 5: Teradek Bolt 4K LT MAX

NOT COMPATIBLE WITH
Gen 2: Teradek Bolt 300
Gen 2: Teradek Bolt 600
Gen 2: Teradek Bolt 2000

Gen 3: Teradek Bolt 500
Gen 3: Teradek Bolt 1000
Gen 3: Teradek Bolt 3000 Pro

Gen 5: Teradek Bolt 4K 750
Gen 5: Teradek Bolt 4K 1500
Gen 5: Teradek Bolt 4K MAX 5000

MADE FROM
High-grade 6061-T651 aluminium billet
3mm carbon fibre sheet

SHIPS WITH
Three ¼”-20 x ½" countersunk screws
Eight M2 x 6mm socket head cap screws

WEIGHT
1.2oz / 36g

DIMENSIONS (LxWxH)
2.0 x 0.5 x 3.7” / 52 x 13 x 95mm

.

We offer a range of premium accessories and cables to fully accessorise and optimise RED V-RAPTOR whether you're in gimbal, handheld or tripod mode.

All of our products are designed, manufactured and assembled in Tasmania, Australia.

Unlock the full potential of RED V-RAPTOR:

Fit-for-purpose SDI, power and run/stop:

.

Carbon Back Plate for RED V-RAPTOR

Recently Viewed Items