Run/Stop Cable ‣ MōVI Pro + XL to RED KOMODO Right Angle


This 8-Pin Molex to 9-Pin Lemo Right Angle cable enables run/stop on the MōVI Controller and MIMIC for your RED KOMODO™.

At the gimbal end, the cable plugs into the CAM port located on the side of the MōVI Pro or MōVI XL Tilt Stage Unit (TSU).

To enable run/stop in the Freefly MōVI app, go CONFIGURATIONS > DUAL OP > ADJUSTMENTS > CAMERA TYPE > select ARRI RS.

We believe the ideal cable length is 9-inch for MōVI Pro and 18-inch for MōVI XL in order to avoid coiling or any unwanted snags around the gimbal cage.

These cable lengths enable the KOMODO to be rigged in landscape or portrait modes!

The Ignite Digi range of premium cables made with silicone wire and protected with Techflex braid, are flexible and resistant to abrasion, and designed to endure the most challenging conditions on set.

Assembled and tested in Tasmania, Australia.

Molex Micro-Fit 8-Pin (male) Straight connector
0B 9-Pin (male) Right Angle Lemo compatible connector

9-inch / 23cm for MōVI Pro
18-inch / 45cm for MōVI XL

9-inch ‣ 0.7oz / 20g
18-inch ‣ 1.41oz / 40g


You may also like our other run/stop cables: