TB51 for DJI High-Bright Remote Monitor

Power is fed into the DJI monitor via a Sony NP-F dummy battery with built-in regulator.

The first step is to install the NP-F battery plate (pictured below) into the WB37 battery slot.

If you purchased the DJI Transmission kit or the monitor individually, both include the NP-F battery plate and four M2 x 6mm socket head cap screws.

——————————————


INSTALLATION

1. Remove the four M2 x 5mm countersunk screws
    ↓ ↓ see images below 
2. Mount the NP-F battery plate into the WB37 battery slot
3. Insert and tighten four M2 x 6mm socket head cap screws
4. Insert the Ignite NP-F Dummy Battery
5. Mount the TB51 plate in the centre of the monitor cage (hex key 5/32″)
6. Plug in the 3-Pin Lemo cable
7. Insert TB51 battery
8. Power up!! ⚡⚡⚡

MADE FROM
High-grade 6061-T651 aluminium billet
Ertacetal (high performance plastic)

IN THE BOX
TB51 Battery Plate + mounting bracket
3-Pin Lemo to NP-F Dummy Battery Cable
Four M2 x 6mm socket head cap screws

WEIGHT
9.84oz / 279g plate + cable
26.4oz / 750g plate + cable + TB51
57.6oz / 1634g plate + cable + TB51 + monitor

DIMENSIONS
5.51 x 3.62 x 1.73” / 140 x 92 x 44mm