TB50 Hammerhead ‣ Dual Smart Battery Adapter

OUTPUTS

2 x 2 pin Lemo Outputs:

Regulated 15V up to 100W total.

For use with accessories, or to feed into our Power Breakout with this cable.

2 x 3 pin Lemo Outputs (not Fischer):

Carries both regulated 15V & unregulated 20-25V on different pins, designed to be used for powering cameras.

Our 3 pin camera cables are wired to give your camera the correct voltage: 15V for RED DSMC2 and 20-25V for Alexa Mini/Mini LF.

The 3 pin is wired the same as our MōVI Pro Expansion Pack so you can use the same camera cables across both! We can make custom camera cables by request.

1 x USB-C PD Output up to 60W for powering/charging your laptop, phone, cameras like the Panasonic S1H & accessories such as Sound Devices MixPre II.

*USB-C power draw is from the regulated 15V total of 100W.

1 x USB-A 3.1 (QC 3.0) Output up to 18W for charging your phone & accessories when travelling or on set.

*USB-A power draw is from the regulated 15V total of 100W.

INPUT

1 x 8 pin Lemo socket: 20-28V DC input. eg.: from VCLX block battery (3 pin XLR 28V) or a 24V power supply.

This is the same socket as the ARRI Alexa Mini/Mini LF so you can use ARRI’s 3 pin XLR to 8 pin lemo cable: K2.75007.0

Note: When feeding 28V in, the 3 pin Lemo Outputs will then carry 15V and 28V rather than 15V and 20-25V.

- CNC machined at Ignite Digi HQ from aircraft grade 6061-T651 aluminium and hard anodised.

- Status lights to show 15V and 20-25V output ready

- Designed, CNC manufactured and assembled in Australia by Ignite Digi.

- Weight:650g (1.4 lbs) without batteries/1700g (3.7 lbs) with batteries.

Pinouts:

2 pin EEG.0B.302 Lemo

Pin 1 - ground Pin 2 +15V

3 pin EEG.0B.303 Lemo

Pin 1 - ground Pin 2 +15V Pin 3 +20-25V*

*Pin 3 passes direct input voltage so if you use a 28V VCLX, it will pass 28V through.