This 6-Pin Lemo Straight to 2-Pin Lemo Straight cable allows you to send power from the Ronin 2 to your accessories.
There's a few use case scenarios.
You can send power to our Power Breakout solution - providing three additional on camera 2-Pin Lemo outputs.
Alternatively, you could power ring mounted accessories such as a SmallHD 503, 703, Cine 7 or Teradek Transmitter that have a 2-Pin Lemo input.
The Ronin 2 gimbal delivers regulated 14.4V from two onboard Accessory Power Ports. One on the underside of the cage and the other at the top of the Pan Motor.
12-INCH / 30CM
This is the ideal length for most camera builds using our Power Breakout. Our advice is to mount the Power Breakout at the back of the Camera Top Plate for ergonomic cable routing and gimbal weight distribution.
8-INCH / 20CM
This is the optimal length cable when running a Power Breakout mounted to the bottom of our KEYSTONE for RED KOMODO™.
As mentioned above, this cable can be used to power your existing accessories. Let us know if you require a custom length by adding a note during the checkout process.
If you need any advice on the best combination to suit your particular camera build, feel free to direct message Tom Waugh via the Ignite Digi Instagram, or drop him an email firstname.lastname@example.org
The Ignite Digi range of premium cables made with silicone wire and protected with Techflex braid, are flexible and resistant to abrasion, and designed to endure the most challenging conditions on set.
Assembled in house by our team in Tasmania, Australia.
‣ 1B 6-Pin (male) Lemo Straight compatible connector
‣ 0B 2-Pin (male) Lemo Straight compatible connector
8" / 20cm
12” / 30cm
8" ‣ 1.05oz / 30g
12" ‣ 1.26oz / 35g