𝙺𝚎𝚢𝚜𝚝𝚘𝚗𝚎: 𝙺𝚎𝚢·​𝚜𝚝𝚘𝚗𝚎 | \ ˈ𝙺ē-ˌ𝚜𝚝ō𝚗 \ 𝚜𝚘𝚖𝚎𝚝𝚑𝚒𝚗𝚐 𝚘𝚗 𝚠𝚑𝚒𝚌𝚑 𝚊𝚜𝚜𝚘𝚌𝚒𝚊𝚝𝚎𝚍 𝚝𝚑𝚒𝚗𝚐𝚜 𝚍𝚎𝚙𝚎𝚗𝚍 𝚏𝚘𝚛 𝚜𝚞𝚙𝚙𝚘𝚛𝚝.



 ‣ Enables the ultimate rigging flexibility for large or small builds

 ‣ Unlocks Ignite Digi’s existing ecosystem of products

 ‣ 91 threaded mounting holes + two ARRI Rosettes

 ‣ Extremely strong! CNC milled from a single block of 6061-T6 aluminium

 ‣ Does not obstruct access to camera components

 ‣ Enables optimal cable routing for a clutter free rig

 ‣ Hard anodised for life on set

The Ignite Digi KEYSTONE unlocks the new RED KOMODO™ camera for use with Freefly MōVI Pro, DJI Ronin 2 and Quick Mode Changes from gimbal, handheld and tripod setups.

CNC milled from a single block of 6061-T6 Aluminium and precision fit with 4 x M4 bolts to the body, it gives the camera rigidity and a wide array of mounting options.

Designed for those professionals needing to run the KOMODO with large (or small) cinema primes and zooms, while also mounting multiple accessories like FIZ, EVF, monitors, audio and more. 

Neatly run Lemo cables through the KEYSTONE to help keep your rig clean.

For those with Ignite Digi's ALEXA Mini/RED DSMC2 Top Plate and Gimbal Mate Bottom Plate you will be able to bolt these straight onto the KEYSTONE and make use of your Quick Mode Change setup!

"The symmetrical layout of the KEYSTONE means changing from landscape to portrait modes is as straight forward as swapping plates 90°"

Retain access to the touch screen, card slot and audio interface in both landscape and portrait modes.

Power and Run/Stop cables? We have those ready to ship!


 ‣ M3 and M4 holes on all front and back surfaces give you options to attach Rod Mounts and Power Breakouts

 ‣ ARRI spaced M4 holes on all sides enable you to mount Ignite Digi or ARRI camera plates and other accessories

 ‣ ¼”-20 threads on all sides

 ‣ Two ARRI standard M6 (31.8mm diameter) rosettes for handles

 ‣ Six ARRI standard ⅜"-16 threads with anti-rotation pin connector (pin-loc) / 2x top, 2x bottom, 1x left, 1x right

 ‣ Four cold shoe mounts placed at 45° degrees on each corner for microphones and wireless receivers


 ‣ Canon RF to EF

 ‣ Canon RF to EF with Control Ring
 ‣ Canon RF to EF Drop-In Variable ND
 ‣ Canon RF to EF Drop-In Circular Polariser

 ‣ Canon RF to EF Speedbooster 0.71x
Can I rotate the filter wheel when mounted to KEYSTONE? Yes.
Can I swap drop in filter cartridges while mounted to KEYSTONE?
In order to swap between CLEAR, Variable-ND and Circular Polariser drop in filters, you will need to remove the mount from the RED KOMODO body due to space constraints.

 ‣ KipperTie Adapta RF to PL
 ‣ KipperTie Revolva RF to PL
  KipperTie Adapta RF to EF
 ‣ KipperTie Revolva RF to EF
Can I rotate the filter wheel when mounted to KEYSTONE? Yes.
Can I swap filter cartridges while mounted to KEYSTONE? No.
In order to swap filter cartridges
you will need to remove the KipperTie mount and RED KOMODO from the KEYSTONE due to space constraints
Which filter cartridge does Ignite Digi recommend?
We recommend using Cartridge S containing CLEAR, 0.6, 1.2 & 2.1 ND and treat it like an ARRI ALEXA Mini.

 Wooden Camera RF to PL
We recommend using the 15mm Baseplate Upper ARCA Dovetail (279300) and Vertical Lens Support Posts (900136) with this lens mount adapter. 

  Metabones RF to PL
Metabones Detachable Arca-Type Tripod Foot and Mount-Rod Support (MB_MR-SK-BM1) are not compatible with KEYSTONE.

 Vocus RF to PL
Vocas PL Adapter Support (0900-0030) and Separate 15mm Support (0900-0025) are not compatible with KEYSTONE.

 ‣ Eight M4 x 10mm socket head cap bolts
 ‣ Two ⅜"-16 to ¼”-20 thread inserts

14.46oz / 410g including rosettes and M4 mounting bolts

5.51 x 5.51 x 1.65” / 140 x 140 x 42mm