Your Cart is Empty
🔥 FREE DHL EXPRESS SHIPPING ON ORDERS AUD $1200+ 🔥
IG.100165
Sold Out
TB50 Hammerhead is a rod mounted battery module for your camera and accessories.
It utilises two DJI TB50 batteries for hot-swappable power all day long!
Hammerhead features simultaneous 15V and 20-25V Lemo outputs, as well as USB-C and USB-A.
Whether you’re operating ALEXA Mini, V-RAPTOR or VENICE, Hammerhead combined with our premium braided cables will keep your build clean, fast and reliable.
Read more about the inputs, outputs, run times and tech specs below ↓
• Two 2-Pin Lemo Lemo outputs
• Two 3-Pin Lemo Lemo outputs
• USB-C & USB-A outputs
• Hot-swappable
• DC input for block battery
• Supports high draw cameras and accessories
• Can be used with Lightweight 15mm, Studio 15mm & Studio 19mm rods
• Achieve fast Quick Mode Changes!
• Made from high-grade aluminium billet
Two 2-Pin Lemo outputs
Regulated 15V up to 100W total
Feed power into Power Breakout
Power FIZ, monitor, EVF
Two 3-Pin Lemo outputs
Regulated 15V & unregulated 20-25V
For powering cameras
One USB-C
Up to 60W
Power laptops, cameras, audio devices
One USB-A
Up to 18W
Power phones & tablets
Scroll down ↓ to view our list of recommended cables optimised for TB50 Hammerhead.
8-Pin (female) 2B Lemo 20-28V DC
Extend run times during gear prep and in between long takes!
Source power from industry standard block batteries like the bebob CUBE 1200 and Anton Bauer VCLX with these cables:
• Built for high draw
• TB50's can power cameras, gimbals, drones, wheels and remote controllers
• Lightweight, compact and air travel safe
• Built-in 70W self heating system
• Automatic protection cutoff at 2%
• Automatic self discharging down to 60%
• Cell health visible in the DJI GO App
• TB50’s and Charging Hubs are affordable and commonly found around the world
TB50's will streamline your workflow. Use one type of battery and charger to power your entire kit and reduce the amount of gear required when travelling!
TB50 BATTERY
4280mAh / 97.58Wh
Below is an approximate run time until battery protection cut off.
2 - 2.5 HOURS
for ALEXA Mini LF + Teradek Bolt + SmallHD 703 UltraBright + 3x Tilta FIZ motors
BATTERY LEVEL
Use the TB50 LED indicator lights to judge battery level. We recommend changing the battery with one light illuminated (25%) or at the latest, one light flashing.
Hammerhead is hot-swappable! 🔥 Ensuring maximum power availability and eliminating downtime.
HOT TIP
When you need to change two exhausted batteries, give the system time to ensure power isn't lost.
Swap out the first TB50, wait 5 seconds, then swap the second.
This gives the battery a moment to wake up, check for errors and deliver power.
Hammerhead offers USB-C and USB-A to keep your devices healthy. Anytime, anywhere!
Particularly handy for file transfers and editing in the field, charging a GoPro, Tentacle Sync, phone or tablet.
For example, you could charge a 16" MacBook Pro twice with two TB50's!
TB50 Hammerhead ships with a LW15mm rod mount with 60mm spacing.
Slide onto carbon, steel or titanium rods with our Quick Release Bridge Plate.
The ratchet lever makes for easy position adjustments!
Underneath, the four M3 x 12mm socket head cap screws can be loosened to reposition the Hammerhead 90 degrees if required.
For those running 15mm or 19mm Studio Bridge Plates, we have a solution!
Source power from the 3-Pin Lemo on Hammerhead with these premium braided cables:
3-Pin Lemo to ALEXA Mini + Mini LF + 35
3-Pin Lemo to ALEXA Classic + 65 + Film Cameras
3-Pin Lemo to V-RAPTOR-XL + RANGER
The cable we recommend for sending regulated 15V from the Hammerhead to our Power Breakout is:
2-Pin Lemo Right Angle to 2-Pin Lemo Straight
We believe the 14-inch variant is best to keep your build clean and efficient.
Use these cables to power your FIZ system, monitor, recorder and EVF.
MADE FROM
High-grade 6061-T651 aluminium billet
Hard anodised
WEIGHT
23.7oz / 674g solo
60.6oz / 1720g with two batteries
DIMENSIONS (LxWxH)
3.6 x 3 x 6.6" / 92 x 77 x 169mm
Designed, manufactured and assembled in Tasmania.
We do our best to populate our store with as much technical info as possible!
If you have further questions or need advice for camera builds and projects, please get in touch with co-founder Tom Waugh.
Direct message via the Ignite Digi Instagram, or drop him an email: tom@ignitedigi.com.au
Just keep in mind he's living in Australian Eastern Standard Time (GMT/UTC+10).
